|
A
- KLEEN
GROUND & KLEEN PAK (Decarb-free)* |
|
Surface
ground/fine-milled flats and squares |
|
Thickness..........................................................................+0.015"/+0.030" |
|
Width................................................................................+0.015"/+0.025" |
|
*Kleen Pak
available in 40 1/2" Lengths |
| |
|
B
- KLEEN
MACHINED (Decarb-free) Flats and Squares |
|
Surface
milled medium/large size flats and
squares...+0.100"/+0.180" |
| |
|
C
- KLEEN
PEELED (Decarb-free) Rounds |
|
Peeled
Rounds, 1/2" - 1 7/8"
diameter.......................+0.010"/+0.035" |
| |
|
D
- KLEEN
TURNED (Decarb-free) Rounds |
|
Turned Rounds
2" diameter and over |
|
2" -
3".......................................................................+0.020"/+0.054" |
|
3 1/4" - 4
1/2"...........................................................+0.039"/+0.083" |
|
4 3/4" -
7".................................................................+0.059"/+0.124" |
|
7 1/2" - 9
1/2"...........................................................+0.079"/+0.157" |
|
10" and
up.................................................................+0.079"/+0.218" |
|
|
|
E
-
HOT-ROLLED (Unmachined) Flats and
Squares |
|
Flats and Squares (Rolled
Bar)................Thickness 0/+0.020" to
0/+0.060" |
|
........Width
0/+0.040" to 0/+0.100" |
|
(Depending
on Section) |
|
Flats (Rolled
Plate) |
|
< 1 7/8"
Thick................................................................+0.125"/+0.185" |
|
2
- 2 7/8"
Thick............................................................+0.188"/+0.288" |
|
> 2 7/8"
Thick...............................................................+0.188"/+0.338" |
|
|
|
F
- FINE
MACHINED T&B PLATE |
|
Thickness..........................................................................+0.015"/+0.035" |
|
Width................................................................................+0.100"/+0.180" |
|
|
| |
|
Note: Tolerances
may vary on sizes. |
| |
" Great Tooling Starts Here!" |
| 800-638-2520 |